diff --git a/doc/device-tree-bindings/power/ti,sci-pm-domain.txt b/doc/device-tree-bindings/power/ti,sci-pm-domain.txt
new file mode 100644
index 0000000..0e190e2
--- /dev/null
+++ b/doc/device-tree-bindings/power/ti,sci-pm-domain.txt
@@ -0,0 +1,52 @@
+Texas Instruments TI SCI Generic Power Domain
+=============================================
+
+Some TI SoCs contain a system controller (like the SYSFW, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI SCI [1].
+
+[1] http://processors.wiki.ti.com/index.php/TISCI
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the SYSFW. Because
+this relies on the TI SCI protocol to communicate with the SYSFW it must be a
+child of the sysfw node.
+
+Required Properties:
+--------------------
+- compatible: Must be "ti,sci-pm-domain"
+- #power-domain-cells: Must be 1 so that an id can be provided in each
+		       device node.
+
+Example (AM65x):
+----------------
+	sysfw: sysfw {
+		compatible = "ti,am654-system-controller";
+		...
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <1>;
+		};
+	};
+
+PM Domain Consumers
+===================
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node
+along with an index representing the device id to be passed to the PMMC
+for device control.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node
+		 and an ID representing the device.
+
+Example (AM65x):
+----------------
+	uart2: serial@02800000 {
+		compatible = "ti,omap4-uart";
+		...
+		power-domains = <&k3_pds 0x3f>;
+	};
diff --git a/drivers/power/domain/Kconfig b/drivers/power/domain/Kconfig
index 4618847..2c34488 100644
--- a/drivers/power/domain/Kconfig
+++ b/drivers/power/domain/Kconfig
@@ -38,4 +38,11 @@
 	  Enable support for manipulating Tegra's on-SoC power domains via IPC
 	  requests to the BPMP (Boot and Power Management Processor).
 
+config TI_SCI_POWER_DOMAIN
+	bool "Enable the TI SCI-based power domain driver"
+	depends on POWER_DOMAIN && TI_SCI_PROTOCOL
+	help
+	  Generic power domain implementation for TI devices implementing the
+	  TI SCI protocol.
+
 endmenu
diff --git a/drivers/power/domain/Makefile b/drivers/power/domain/Makefile
index c541330..6bdaa17 100644
--- a/drivers/power/domain/Makefile
+++ b/drivers/power/domain/Makefile
@@ -8,3 +8,4 @@
 obj-$(CONFIG_SANDBOX_POWER_DOMAIN) += sandbox-power-domain.o
 obj-$(CONFIG_SANDBOX_POWER_DOMAIN) += sandbox-power-domain-test.o
 obj-$(CONFIG_TEGRA186_POWER_DOMAIN) += tegra186-power-domain.o
+obj-$(CONFIG_TI_SCI_POWER_DOMAIN) += ti-sci-power-domain.o
diff --git a/drivers/power/domain/ti-sci-power-domain.c b/drivers/power/domain/ti-sci-power-domain.c
new file mode 100644
index 0000000..aafde62
--- /dev/null
+++ b/drivers/power/domain/ti-sci-power-domain.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Texas Instruments System Control Interface (TI SCI) power domain driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andreas Dannenberg <dannenberg@ti.com>
+ *
+ * Loosely based on Linux kernel ti_sci_pm_domains.c...
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <power-domain-uclass.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_power_domain_data - pm domain controller information structure
+ * @sci: TI SCI handle used for communication with system controller
+ */
+struct ti_sci_power_domain_data {
+	const struct ti_sci_handle *sci;
+};
+
+static int ti_sci_power_domain_probe(struct udevice *dev)
+{
+	struct ti_sci_power_domain_data *data = dev_get_priv(dev);
+
+	debug("%s(dev=%p)\n", __func__, dev);
+
+	if (!data)
+		return -ENOMEM;
+
+	/* Store handle for communication with the system controller */
+	data->sci = ti_sci_get_handle(dev);
+	if (IS_ERR(data->sci))
+		return PTR_ERR(data->sci);
+
+	return 0;
+}
+
+static int ti_sci_power_domain_request(struct power_domain *pd)
+{
+	debug("%s(pd=%p)\n", __func__, pd);
+	return 0;
+}
+
+static int ti_sci_power_domain_free(struct power_domain *pd)
+{
+	debug("%s(pd=%p)\n", __func__, pd);
+	return 0;
+}
+
+static int ti_sci_power_domain_on(struct power_domain *pd)
+{
+	struct ti_sci_power_domain_data *data = dev_get_priv(pd->dev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dops = &sci->ops.dev_ops;
+	int ret;
+
+	debug("%s(pd=%p)\n", __func__, pd);
+
+	ret = dops->get_device(sci, pd->id);
+	if (ret)
+		dev_err(power_domain->dev, "%s: get_device failed (%d)\n",
+			__func__, ret);
+
+	return ret;
+}
+
+static int ti_sci_power_domain_off(struct power_domain *pd)
+{
+	struct ti_sci_power_domain_data *data = dev_get_priv(pd->dev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dops = &sci->ops.dev_ops;
+	int ret;
+
+	debug("%s(pd=%p)\n", __func__, pd);
+
+	ret = dops->put_device(sci, pd->id);
+	if (ret)
+		dev_err(power_domain->dev, "%s: put_device failed (%d)\n",
+			__func__, ret);
+
+	return ret;
+}
+
+static const struct udevice_id ti_sci_power_domain_of_match[] = {
+	{ .compatible = "ti,sci-pm-domain" },
+	{ /* sentinel */ }
+};
+
+static struct power_domain_ops ti_sci_power_domain_ops = {
+	.request = ti_sci_power_domain_request,
+	.free = ti_sci_power_domain_free,
+	.on = ti_sci_power_domain_on,
+	.off = ti_sci_power_domain_off,
+};
+
+U_BOOT_DRIVER(ti_sci_pm_domains) = {
+	.name = "ti-sci-pm-domains",
+	.id = UCLASS_POWER_DOMAIN,
+	.of_match = ti_sci_power_domain_of_match,
+	.probe = ti_sci_power_domain_probe,
+	.priv_auto_alloc_size = sizeof(struct ti_sci_power_domain_data),
+	.ops = &ti_sci_power_domain_ops,
+};